User Manual

19
For example, if user wants to link the Network 3 and Network 4 separately from Network 1
that Routing Table configuration as below:
1. Enter IP Address of Network 3, Subnet Mask and IP Address of Router (R1) in Default
Gateway field final click Apply Change button.
2. Enter IP Address of Network 4, Subnet Mask and IP Address of Router (R2) in Default
Gateway field final click Apply Change button.
3. In current Routing table there have two routings for Network 3 and Network 4.
Static Routing Settings:
Add a routing rule table:
Item Description
Destination
Input the destination IP domain.
Range
Choose the range from Host and Net. When selecting “Net”,
the Netmask option is opened for configuration.
Netmask
Enter the network mask for this route.
Gateway
Enter your gateway for this route.
Interface
WAN, LAN, Custom
Comment
Enter your note about this route.
Current Routing table in the system: