User Manual

21
The QoS function is configurable in Gateway and WISP mode.
QoS Setup
Item
Description
Quality of Service
Select “Enable” to enable this function. The detail setting
shows when the function is enabled.
Upload Bandwidth
Select the upload bandwidth of WAN interface.
Download Bandwidth
Select the download bandwidth of WAN interface.
QoS Group
Item
Description
Group name, Rate
and Ceil
Click the “Modify” button to change the group name, rate
and ceil. There are four groups for configuration.
QoS rule
Item
Description
No
This is the number of the rule. To delete the rule, check the
box besides the number and click “Delete” button.
Name
This is the name of this rule.
Group
This is the Group of this rule. All rules in one group shares
the same Rate and Ceil settings.
Info.
The other information such as Protocol, DSCP, etc.
Load Default
Click this button to apply the default QoS rules. If you don’t
know where to start, just click this button and you can
modify the provided QoS rules.
Add a QoS rule: Click the “Add” button and the detail windows shows up. Enter the rule for
the QoS.
QoS rule
Item
Description
Name
This is the name of the QoS rule.
Group
Select the group for this QoS rule. This QoS rule applies
the rate of bandwidth and Ceil of the QoS group.
MAC Address
Input the source MAC Address.
Destination IP
Address
Input the destination IP Address for this rule.
Source IP Address
Input the source IP Address for this rule.
Packet Length
Input the packet length for this rule. For example, enter
0-128 for small packets.
DSCP
Input the packets with DSCP value “BE, AF11-43, EF” to
apply this rule.
Protocol
Select the type of protocol. The available options are “TCP,
UDP, ICMP, and Application”. Choose the Application