User Manual

27
b/g mode and not supported by some of very early stage of
802.11b station cards. If there is no such kind of stations
associated to this AP, you can enable this function.
Short Slot
For a WLAN network with 802.11g/n devices, the time slot
can be set short to increase the throughput. Disable this
option for the backward compatibility with 802.11b device.
Tx Burst
The device will try to send a serial of packages with single
ACK reply from the clients. Enable this function to apply it.
Wi-Fi Multimedia
Item
Description
WMM Capable
Choose “Enable” to enable WMM function.
WMM Parameter
Click the button to edit the WMM parameter.
Multicast-to-Unicast Converter
Item
Description
Multicast-to-Unicast
Enable/Disable to enable this function.
Security
Wireless Security/Encryption Settings
Select SSID
Item
Description
SSID choice
Choose the ESSID to configure the security setting.
Wireless Security/Encryption Settings
Item
Description
Security Mode
Disable, OPEN, SHARED, WEPAUTO, WPA, WPA-PSK,
WPA2, WPA2-PSK, WPA/WPA2 PSK, WPA/WPA2,
802.1X.
The available options are showed according to the numbers of the BSSID in the
Basic Setting. Each SSID can setup different encryption type. For example, set up 4
BSSID and 4 sets of security shows on this page:
z Security Mode: Choose one as the wireless authentication among the following
types: Open, Shared, WEP Auto, WPA, WPA-PSK, WPA2, WPA2-PSK,
WPA/WPA2-PSK, WPA/WPA2, and 802.1 X.
z Encryption Type: Select one for the encryption type. The options vary
depending on the Authentication mode. The corresponding options shows