User Manual

38
Firewall
MAC/IP/Port Filtering Settings
Basic Settings
Item
Description
MAC/IP/Port Filtering
Enable or Disable the filtering.
Default Policy
The packet that don’t match with any rules would be:
“Accepted/Dropped”.
MAC/IP/Port Filter Settings
Item
Description
MAC Address
This is the MAC Address applying to this rule.
Dest. IP Address
This is the range of the destination IP Address.
Source IP Address
This is the range of the source IP Address.
Protocol
Select one protocol to apply to this rule. The available
options are “None, TCP, UDP and ICMP”.
Dest. Port Range
This is the range of the destination port.
Source Port Range
This is the range of the source port.
Action
This is the policy of this rule. The available options are
“Drop and Accept”.
Comment
You can add your note for this rule.
Current MAC/IP/Port filtering rules in system:
The current configured rules are listed it this table. To delete a rule, check the box in
front of the rule and click “Delete Selected” button.