User's Manual

29
User Name/Password: enter the User Name and Password provided by your ISP.
WAN DHCP type: iW¶VDYDLODEOHRQO\IRU333R(connection. If your ISP provides an extra
type to connect to a local area network such as DHCP Client/Static IP/normal PPPoE, you
should select the type and enter the right parameters provided by ISP to enable the
secondary connection.
DNS: Domain Name System. If you select Set DNS Manually, you will have to type in the
DNS address by yourself. It is chosen to Attain DNS by default.
Connection Type: provides three modes to connect to the Internet.
z Constant: the connection can be re-established automatically.
z Connection on demand: the Internet connection can be terminated automatically after
a specified inactivity period (idle time) and be re-established when you want to access
the Internet again.
z Connection manually: you can click Connect or Disconnect button to
connect/disconnect immediately.
Service Name (AC): this is optional. It describes the service name your ISP provided to
you. Generally, leaving these fields blank will work.
MTU: it means Max Transmit Unit for packet. When using slow links, large packets can
cause some delays thereby increasing lag and latency.
Clone MAC Address: 0$&DGGUHVVLVWKHSK\VLFDODGGUHVVRI\RXUFRPSXWHU¶VQHWZRUN
card. Generally, every network card has one unique Mac address. Since many ISPs only
allow one computer in LAN to access Internet, users can enable this function to make more
computers surf Internet.
5.1.2.2 PPTP
You should select PPTP option if ISP provides a PPTP connection and enter the following
parameters. Please refer to PPPoE configuration if there are the same parameters.