User's Manual
33
66,'IRUGLIIHUHQWQHHGV:KDW¶VPRUH\RXFDQVHWXS different encryption for different
SSIDs in Security Settings section. We will introduce in 5.2.2 Security Settings
WMM is an abbreviation of Wi-Fi Multimedia. It defines the priority levels for four access
categories derived from 802.1d (prioritization tabs). The categories are designed with
specific types of traffic, voice, video, best effort and low priority data.
Data Rate
This defines the data rate (in Mbps) at which the device should transmit wireless packets.
You can fix a specific data rate between MCS 0 and MCS 7 also. It is recommended to use
Auto option, especially if you are having trouble getting connected or losing data at a higher
rate.
MCS means Modulation Coding Scheme. Before 802.11n standard emerges, most
Access Points complies with 802.11a/b/g standards and the data rate ranges from
1Mbps to 54Mbps, including only 12 possible physical speed. But when it comes to
802.11n technology, the physical speed can be affected by many factors, such as
modulation type, coding rate, space flow quantity, whether 40MHz banding and so on.
Combining these factors together will create a lot of selectable physical speed. Thus,
802.11n proposes the term MCS. You can consider this term to be a whole combination
of these factors and every digit represents a combination.
Associate Clients: Click Show Active Clients Button it will come to WiFi Station interface.
Note: If you select 20MHz Channel Spectrum width the maximum data rate is MCS7 (65Mbps). If
you select 40MHz Channel Spectrum width the maximum data rate is MCS7(150Mbps).
Note7KLVRSWLRQZLOONHHS(QDEOHGDQGFDQ¶WEHFKDQJHGE\GHIDXOW