User's Manual
40
You need to click Apply Changes to make your setting work.
Current Access Control List: this list will show all the current access control that you have
VHW$QG\RX¶UHDEOHWRGHOHWHVRPHRUDOORIWKHPXVLQJWKHDelete Selected or Delete All
button.
5.2.7 WPS Settings
WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection
between wireless station and wireless access point with the encryption of WPA and WPA2.
Self-PIN Number: it will show the PIN Number of your device.
Push Button Configuration: click Start PBC button to invoke Push-Button style WPS
setup procedure. The router will wait for WPS requests from wireless clients about two
minutes. The WPS LED on the router will blink fast when WPS is in progress. It will return to
normal condition after two minutes. (You need to setup WPS within two minutes.)
STOP WSC: Click the button to stop WSC function.
Client PIN Number: please input the PIN code specified in wireless client you wish to
connect, and click Start PIN button. The WPS LED on the router will blink fast when WPS is
in progress. It will return to normal condition after two minutes. (You need to setup WPS
within two minutes)
Current Key Info: If the wireless security (encryption) function of the router is properly
configured, you can see the encryption information on the list.
5.3 Route Setup
5.3.1 Static Route
This page is used to setup dynamic or static routing protocol.