User's Manual
52
Automatic Uplink Speed: this option allows you to set the total uplink speed automatically.
Manual Uplink Speed (Kbps): set the uplink speed by entering a number in the blank.
Automatic Downlink Speed: this allows you to set the total downlink. By default, it is
4096Kbps as well.
Manual Downlink Speed (Kbps): set the uplink speed by entering a number in the blank.
QoS Rule Setting
Address type: it allows users control the bandwidth by IP or MAC.
Local IP Address: enter the IP address range if address type is IP.
MAC address: enter the MAC address if address type is MAC.
Mode: Guaranteed minimum bandwidth and restricted maximum bandwidth are selectable.
Uplink Bandwidth: please set the max uplink bandwidth.
Downlink Bandwidth: please set the max downlink bandwidth.
Current QoS Rules Table: this table will list the detailed parameter about QoS.
Click Apply Changes to finish the setting.
5.6.3 Operation mode
This parameter specifies the operating network modes for the router. Since we have
introduced on the Setup Wizard section, just refer to Setup Wizard
,I\RXGRQ¶WNQRZKRZWRFKRRVHWKHFRUUHFWRSHUDWLRQPRGHSOHDVHFOLFN2SHUDWLRQ0RGH
Help Button. The interface for help will appear right now. This interface will introduce the
difference of different modes.