User's Manual

12
same one via wireless connections, especially for a home or office where separated
networks FDQ¶W be connected easily together with a cable.
F: Client
In this mode, the device can be connected to another device via Ethernet port and act as a
"Wireless Adapter" to connect your wired device to a wireless network.
4.3.1 Router Mode
After selecting the Router mode in the last step, click next to continue the other settings.
1. This page allows you to maintain the system time synchronizing with a public time server
over the Internet. +HUH \RX FDQ VSHFLI\ WKH GHYLFH¶V WLPH ]RQH DFFRUGing to GMT
(Greenwich Mean Time). Then click Next.
Enable NTP client update: NTP means Network Time Protocol which is used to make the
computer¶V time synchronized with its server or clock source, such as Quartz and GPS. It
can provide high-precision time correction and prevent harmful protocol attack by
confirming encryption. You need to check this box to activate this page.
Automatically Adjust Daylight Saving: If the Time Zone you choose implements daylight
saving time, please select this option.
Time Zone Select: Select the Time Zone where the router is located.
SNTP server: Please choose the corresponding SNTP server to get right time.
2. This page is used to configure the parameters for local area network which connects to
the LAN port of your Access Point.
IP Address: this is the IP address to be represented by the LAN (including WLAN)
interface that is connected to the internal network. This IP will be used for the routing of the
internal network (it will be the Gateway IP for all the devices connected on the internal