User Guide

Android POS Terminal Model-
Z600
Quick start guide
Thanks for your purchase of Product Descrption.
Please read this guide first before you use the
device,and it will ensure your safety and the
proper use of equipment.About the equipment
configuration, please check with the relevant
contracts of the device or consult the seller who
sells the equipment to you.
The pictures in this guide are for reference only,
if some pictures do not match the physical product,
please in kind
prevail.Many network function which
is described in this manual is the specific service by
the network service providers. Whether use these
functions,it depends on the Internet service provider
who services for you.
Without the company's permission, anyone should
not use any forms or any ways to
copy, excerpts,backup,modify,spread,translated into
other languages,all or partly used for commercial
Indicator icon
Warning: may hurt themselves orothers
Caution: may damage your equipment
r other devices
Note: the annotations, use hints
or additional information
Toknowtheproduct
Front view
Back View
Charging for the battery
Before using the device for the first time or the battery for a
long time did not make Unavailable,you must first to
charge the battery.
Only use the company matching chargers, battery
and data cables.Using the charger or data cable
without permission will cause the battery explosion
or will damage the equipment.In the condition of
charging, LED light shows red;When the LED light
shows green,it expresses that the battery has been
complete
d;
Boot/Shutdown the machine
When you boot up the device,Please install the battery. Then
wait for some time, when it appears the boot screen,it will lead
the progress to complete and go into Android operating
system.It needs a certain period of time at the beginning of the
equipment initialization,so please kindly wait for it patiently.
When shutdown the device, please remove the battery
Using the touchscreen
Use Notes
The operating environment
Please do not use this device in the thunderstorm
weather, because the thunderstorm weather may result
in the equipment failure, or click the danger.
Please put the equipment from rain, moisture and liquids
containing acidic substances, or it will make the electronic
circuit boards corrosion.
Don’t store the device in overheating, high temperature,
or it will shorten the life of electronic devices.
Don't store the device in a too cold place, because when
the device’s temperature rises, moistur
e can form inside,
and it might damage the circuit board.
Do not attempt to disassemble the device,
non-professional personnel handling can damage it.
Do not throw, beat or intense crash the device, because
rough treatment will destroy the device’s parts, and it
may cause the device failure.
Children's health
Please put the device, its components and accessories
in the place where children can't touch.
This device is not toys, so children should be under
adult supervision
to use it.
The charger security
When charging the device, power sockets should be
installed near the device and should be easy to hit.And
the areas must be far away from the debris, flammable
or chemicals.
Please do not fall or crash the charger.When the charger
shell damaged, please ask the vendor for replacement.
If the charger or the power cord is damaged, please do
not continue to use, so as to avoid electric shock or fire.
Please do not fall or crash the charger.When the charger
shell damaged, please ask the vendor for replacement.
Please do not use wet hand to touch the power cord, or
with power supply cable way out the charger.
The charger must meet the "2.5 restricted power" in the
request of the standard <GB4943.1 information
technology equipment safety
IF the device needs to
connect USB port, please make sure the SUB contains
USB port - IF logo and its performance is in accordance
with the relevant specification of the USB - IF.
The battery safety
Do not use the battery short circuit, or use a metal or other
conductive objects to contact with the battery terminal.
Please do not disassemble, squeeze, twist, pierce or cut
the battery.
Please do not insert foreign body in the battery,contact
the battery with water or other liquid, make the cells
exposed to fire, explosion or other risk sources.
Do not put or store the battery in high temperature
environment.
Please do not put the battery in a microwave or in the
dryer Please do not throw the battery into the fire
If there is a battery leak, do not let the liquid on the skin or
eyes, and if accidentally touched, please rinse with plenty
of water, and seek for medical advice immediately.
When a device in standby time obviously shorter than in
the normal time, please replace the battery
Repair and Maintenance
Don't use strong chemicals or powerful detergent to clean
the device.If it is dirty, please use a soft cloth to clean the
surface with a very dilut
e solution of glass cleaner.
Screen can be wiped with alcohol cloth, but be careful
not to let the fluid accumulate around the screen. Dry the
display with a soft non-woven cloth immediately, in order
to prevent the screen from leaving the strip traces.
Click
Touch once, select or openthefunction
menu, options or
FCC Regulations:
This device complies with part 15 of the FCCRules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Thisequipment has been tested and found to comply with the
limits for a ClassB digital device, pursuant to part 15 of the
FCCRules. These limits are designed to provide reasonable
protection again
st harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment doescause harmful interference
to radio or television reception, which can be determined by
turning the eq
uipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TVtechnician for
help.
Changes or modificationsnot expressly approved by the
manufacturer coul
d void the user’s authority to operate the
equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCCradiation exposure limits set
forth for an uncontrolled environment. To comply with FCCRF
Exposure compliance requirements, this grant is applicable to only
Mobile Configurations. The antennas used for the transmitter
must be installed to provide a separation distance of at least 20cm
from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.