Installation manual

4. Installation Setup
Image 4-15
Put the cable tube connector through the opening
3. Tighten the fastener ring so that the cable tube is secured to the block.
Image 4-16
Tighten the fastener ring so that the cable tube is secured to the block
4. Connect the EHT cable to the EHT connection on the back of t
he electric block.
Image 4-17
Connecting the EHT cable
5. Connect the RGB cables to the BNC connectors on the back of the electric block, the cables and connectors are marked with
their respective colors.
R5976397 BARCOREALITY 909 SPLIT PACK 27/02/2003
23