Installation manual

6. Source Connections
Image 6-3
Second RGB Module
S1 Force Negative Sync (ON = Yes)
S2 Blue in Green (ON = Yes)
R1 Red
R21Green
R41Blue
R81Horizontal Sync.
R101 Vertical Sync.
WARNING: When removing the second RGB module, turn off the projector and unplug the power cord from
the wall outlet.
How to remove the second RGB module?
1. Loosen the two bolts on each side of the projector.
Image 6-4
Loosen the two bolts on each side of the projector
2. Lift up the protection plat
e.
R5976397 BARCOREALITY 909 SPLIT PACK 27/02/2003
35