Installation manual

7. Installation Adjustment Mode
7. INSTALLATION ADJUSTMENT MODE
Overview
• Starting up the Installation Adjustment Mode
• Password Protection
• Overview flowchart of the Installation Adjustment Mode
• Projector Position
• Optical Lens Focusing
• Raster Centering
• CRT Projection Angle Adjustment
• Scheimpflug Adjustment (Diagonal Image Focusing)
7.1 Starting up the Installation Adjustment Mode
How to Start Up the Installation Adjustment Mode?
1. Press the ADJUST key to start up the Adjustment Mode.
The main Adjustment Mode menu will be displayed.
2. Push the ↑ or ↓ keys to select Installation and press ENTER to select.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-1
A warning will be displayed on the screen.
WARNING RISK OF ELECTRICAL
SHOCK NO USER ADJUSTABLE PARTS
INSIDE
THE FOLLOWING INSTALLATION
MENUS ARE RESERVED TO, AND
TO BE PERFORMED ONLY BY
BARCO PERSONNEL, OR BARCO
AUTHORIZED DEALERS
If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return
Menu 7-2
3. In case you are a qualified and authorized service person.
If yes, Press ENTER to start up the first step of the installation mode: Projector Position.
When entering the installation mode the projector will automatically switch to the internal pattern.
When the password mode is active you will be requested to enter the 4 digit password.
If no, Press EXIT to return.
7.2 Password Protection
Password Protection
Some items in the Adjustment Mode are password protec
ted. While selecting such an item, the projector asks to enter your pass-
word.
R5976397 BARCOREALITY 909 SPLIT PACK 27/02/2003
41