Installation manual

7. Installation Adjustment Mode

PROJECTOR POSITION

PROJECTOR POSITION 1

ENTER

EXIT

TEXT

EXIT

PD / SW / A

PROJECTOR POSITION 2

OPTICAL LENS FOCUSING

Image 7-4

Projector Position Flowchart

5. When the desired settings are reached press ENTER to continue with the Optical Lens Focusing.

7.5 Optical Lens Focusing

Introduction

The optical focusing procedure is performed separately for each lens, the appropriate CRT will be switched on as the user proceeds

through the optical focusing adjustment sequence, following screen will be displayed for each lens:

OPTICAL LENS FOCUSING

1.LOOSEN THE NUT ON THE

REAR OF THE GREEN LENS,

ROTATE THE LENS BARREL TO

FOCUS THE CENTER OF THE

IMAGE THEN TIGHTEN THE NUT.

2.LOOSEN THE NUT ON THE

FRONT OF THE GREEN LENS,

ROTATE THE FRONT SECTION

OF THE LENS TO FOCUS THE

CORNERS OF THE IMAGE

THEN TIGHTEN THE NUT.

<ENTER> to continue

<EXIT> to return

Menu 7-4

How to focus adjusting the lens?

1. Loosen the wing nut at the rear end of the lens.

R5976397 BARCOREALITY 909 SPLIT PACK 27/02/2003