Zip MicroPurity Water Filters ® Installation and Operating Instructions Affix Model Number Label Here 804984 GP 804984 - SP_Zip Filter MicroPurity - 06.18 v1.
Read These Warnings First • • • • • • • • • Designed for indoor use only – do not expose filters to the elements of nature. Do not install where exposed to direct sunlight or temperatures <4°C or >40°C. Must be installed with service isolating valve and double non-return valve. Minimum safe operating water pressure is 70 kPa, maximum 700 kPa. Must be installed with pressure reduction valve if pressure exceeds 700 kPa. Do not install where water quality is unknown or microbiologically unsafe.
How to Replace the Internal Filter Cartridge FILTER CARTRIDGE REPLACEMENT REMOVE FILTER This instruction is for the replacement of the filter in the Zip HydroTap product where the filter is mounted internally. In preparation for your filter flushing, ensure you have a 10 litre container available. Some water may drip from the filter head (socket) during replacement. Keep a towel handy to dry up any drips. To change the Filter: 1. ROTATE 2. PULL DOWN INSERT FILTER 1.
How to Replace the External Filter Cartridge FILTER CARTRIDGE REPLACEMENT REMOVE FILTER This instruction is for the replacement of the filter in product where the filter is mounted externally. Variations apply depending on the product. Refer to individual instructions. In preparation for your filter activation/flushing, ensure you have a 10 litre container available. Some water may drip from the filter head (socket) during replacement. Keep a towel handy to dry up any drips. To Change the Filter: 1.
ZIP 1Z-LS, ZENITH 1NZ-LS, BIRKO 1.5B-LS, ZIP 1.5Z ZENITH 1.5NZ-LS, ZIP 2Z-LS, ZENITH 2NZ-LS, INSTA Filter Performance DataBY - 0.2 Micron HEALTH CLAIM PERFORMANCE CERTIFIED NSF This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances listed below. The concentration of the indicated This system has been tested according to NSF/ANSI and 53reduced for the reduction the substances listed below.
ZIP 1.5Z3-S, ZENITH 1.5NZ3-S, BIRKO 1.5B3-S, ZIP 2Z3-S, ZENITH 2NZ3-S 1Z-LS, ZENITH 1NZ-LS, BIRKO 1.5B-LS, ZIP 1.5Z-LS, Filter Performance Data - 3 Micron HEALTH ZIP CLAIM2Z-LS, PERFORMANCE CERTIFIED BY NSF/ANSI* NITH 1.5NZ-LS, ZENITH 2NZ-LS, INSTANTA 1.5IN-LS system has been to NSF/ANSI 42 for the reduction of HEALTHThis CLAIM PERFORMANCE CERTIFIED BY NSF/ANSI * H CLAIM PERFORMANCE CERTIFIED BYtested NSF according System Tested and Certified by N the substances listed below.
Z-LS, ZENITH 1NZ-LS, BIRKO 1.5B-LS, ZIP 1.5Z-LS, H 1.5NZ-LS, ZIP 2Z-LS, ZENITH 2NZ-LS,Data INSTANTA 1.5IN-LS Filter Performance - Carbon Free 1.5Z-CFCERTIFIED AND BY 2Z-CF LAIM PERFORMANCE NSF HEALTH CLAIM PERFORMANCE CERTIFIED BY NSF m has been tested according to NSF/ANSI Standards 42 and 53 for System Tested and Certified by NSF International against on of the substances listed below.
Contact details Head Office Australia Zip Heaters (Aust) Pty. Ltd. ABN 46 000 578 727 67-77 Allingham Street Condell Park NSW 2200 Postal: Locked Bag 80 Bankstown 1885 Australia Telephone (02) 9796 3100 Free Call 1800 638 633 www.zipwater.com Head Office UK Zip Water UK 14 Bertie Ward Way Dereham Norfolk NR19 1TE Telephone 0345 6 005 005 sales@zipindustries.co.uk www.zipwater.co.uk The term “Zip” is a registered trademark.
