User Manual

806835 v1.02 05.21 G5 User guide
31
3.7 Energy saving
3.7.1 Sleep mode
SECTION 3: Command Centre Screen
SLEEP WHEN 12:12 PM
It gets
dark
Not used
in 2 hours
• Disabled (default).
• Enabled: Any attempt to dispense water will bring the
HydroTap out of sleep mode. Allow sufficient time for
the water to reach the set temperature.
Sleep when...
Select from: It gets dark / Not used in 2 hours / Both
Recalibrate the light sensor after selecting sleep when “it
gets dark”. Ensure the ambient light is typical for operating
conditions (see page 26).