User Manual

806835 v1.02 05.21 G5 User guide
8
SECTION 2: Using the HydroTap
2.2 Touch-Free Wave
Touch-free
Controls Touch-free
sensors on the tap top,
back and sides.
Touch-free
Lights
Dispense
sensors
Safety
sensor
(at back)
Light
Touch-free
Touch-free
Clearance requirements
100mm 100mm
100mm
100mm
RED Boiling & safety
sensors activated, water
dispensed.
BLUE Chilled sensor
activated, water dispensed.
WHITE Sparkling sensor
activated, water dispensed.
PURPLE Lock mode on (when tap is idle).
Flashing RED Sensor activated incorrectly; hand
may be too close to sensor, sensor has been
touched or covered.
WHITE / BLUE / RED Cycling 5 to 10 seconds
Filter needs replacing, CO warning (G5), unit
is in an error mode (refer to Command Centre
screen).
WHITE Flashing rapidly Sensors calibrating when
power is first applied to the tap. Allow 10 seconds.