Installation Guide

807134 v1.03 05.21 HydroTap Tap Instructions
USB Connected to the Tap.
Boiling out Red silicone tube from tap. Cut to length.
Chilled out
(BC, C) Blue silicone tube from tap,
(BCS, CS) Blue JG tube from tap.
Cut to length.
Vent
Clear silicone tube from tap. Cut to
length.
Sparkling out White JG tube from tap. Cut to length.
Ambient out Blue JG tube from tap. Cut to length.
Command Centre connections
6
7
Zip Water (Aust) Pty Ltd
ABN 46 000 578 727
67 - 77 Allingham Street, Condell Park, NSW 2200
Postal: Locked Bag 80, Bankstown 1885, Australia
([phone] | Free Call (Aust): 1800 947 827
www.zipwater.com
Zip Water UK
Trafalgar House
Rash’s Green, Dereham,
Norfolk NR19 1JG
0345 6 005 005 | [e-mail]
specify.zipwater.co.uk
Cleaning and general maintenance
• Wipe surfaces with a damp cloth and then wipe dry
with a clean, dry cloth.
IMPORTANT - For Touch-Free Wave Tap:
• Do not use air-drying disinfectant sprays.
• Do not use abrasives to clean the sensor lenses at
the sides, top and rear of the Touch-Free Wave Tap.
• This could cause permanent malfunction and void
warranty.
Zip
HydroTap
Installation instructions
Touch-Free Wave, Elite Plus, Classic Plus, Classic
B, BA, BC, BCS, CS, C
5
Familiarise yourself with the tap connections
RED
boiling
tube
(BC,
B only)
BLUE
Chilled
tube
(BC, C only)
CLEAR
Vent
tube
(BC,
B only)
Boiling,
Boiling chilled,
Chilled
USB
Chilled sparkling
Boiling
chilled sparkling
Boiling
ambient
RED
boiling
tube
CLEAR
Vent
tube
USB
BLUE
JG
tube
WHITE
JG
tube
WHITE
JG
tube
BLUE
JG
tube
USB
RED
boiling
tube
CLEAR
Vent
tube
USB
BLUE
JG
tube
!
Visit our website to download the manuals
Australia UK