Owner`s manual
Pump Will Not Pull Liquid From the Supply Container:
1. If there is too much vacuum created, the pump will not be able to move
the chemical. This is easily recognized when the squeeze tubing
collapses. If this happens:
a. Check that the squeeze tube or pump cartridge is not jammed.
b. Check the chemical uptake lines for kinks.
c. Ensure that the chemical uptake line is not forming a seal
against the side or bottom of the chemical drum (See
Installing Supply Lines in Installation).
d. Using a less viscous chemical, pumping shorter distances,
setting longer run times and ensuring that the squeeze tube is in
good condition will help address the issue.
2. Check to see that there is not an air leak somewhere along the
chemical supply line.
Warranty
If an item is in need of repair, please call or write to obtain Pump Return
Instructions.
All HS115 dispensers are generally warranted against defects in material and
workmanship for a period of one year from shipment date, except where
otherwise noted. Printed circuit boards have a warranty period of two years,
except where otherwise noted. All plastic parts and parts that come in direct
contact with chemical products under normal operation are warranted for 90
days, except for flex tubing which is warranted to be operational at time of
delivery only. Units will be repaired which are proven to be defective during
the warranty period provided they are returned to Flexible Solutions. No other
warranty is expressed or implied. Warranty does not cover equipment abuse or
misuse, nor does it cover any consequential liability resulting from
performance of the equipment.
Ordering Information
1. Flex Tube – 1203652
2. 1G Jug Thread-on Cap with 90° barb fitting –
CA38mm
3. 1G Jug Bottle Insert with Pick-up Tube – BI38mm
4. 1L Bottle Thread-on Cap – CA28mm
5. 1L Bottle Insert with Pick-up Tube – BI28mm
6. Injection Fitting with Check Valve – 51466
7. 25' P/E Tubing – 25PET
8. Pump Roller Assembly – 39550
9. Mounting Bracket – 87235
10. All Weather Cover – RSC115
13