Installation Guide

802411 - HT Compact Commercial BC, BCHA -AV, AIO, Installation Instructions - Aug 2015 - V2.01 Page 23 of 40
Installation Instructions
Note : The All-In-One vented taps require a Zip Restrictafl ow valve and Tee piece, as supplied, to be fi tted in
the cold water supply line, from the isolation valve (Not supplied), to the mixer tap. (See diagrams)
Note: All plastic tubes must be cut to size. They must have a constant fall back to the unit.
Booster
COLD isolation valve
(Not supplied)
Restricta! ow valve & Tee
(Supplied)
Typical All-In-One Vented assembly with Booster
(See section 4)
1.20
Restrictafl ow valve