Installation Guide

Page 24 of 40 802411 - HT Compact Commercial BC, BCHA-AV, AIO, Installation Instructions - Aug 2015 - V2.01
Section 2
Ventilation
4mm Buffer Pad to
ensure ventilation gap
2.1 Ventilation for All Models
Proper air circulation must be provided for all models. The system will operate correctly only if the recommend-
ed air gaps are achieved during installation. The minimum requirement is for a 50mm air gap either side and
300mm above of the undersink unit.
It is important that the 4mm door buffers (For all installations ) are fitted to the inside edge of the cupboard
door to allow suficient air circulation inside the cupboard. (See the diagram below).
IMPORTANT:
See section 4 for clearances.