Instruction Manual

Questions?
IMPORTANT SAFETY INSTRUCTIONS:
ASSEMBLY INSTRUCTIONS:
CLEANING & MAINTENANCE:
1. Unplug the fixture before cleaning.
2. Use a clean, dry, soft, lint-free cloth.
3. Do not use water or other chemical cleaning agents.
3 LIGHT FLOOR LAMP
This portable lamp has a polarized plug (one blade is wider
than the other). As a safety feature to reduce the risk of
electrical shock and fire, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless the plug can be fully
inserted. Do not alter this safety feature.
This lamp is for indoor use only. The lamp should not be used
near water. Never immerse the lamp in water or other liquids.
Never cover the lamp with any object including cloth or paper
as this is a fire hazard. Do not handle the bulbs immediately
after the light is turned off as they will be hot. This is not a toy.
1. Lay out all parts on a flat surface.
2. Begin assembly at the bottom of the lamp.
3. Insert lamp pole (B) into lamp base (A) and tighten.
4. Insert lamp pole (C) into lamp pole (B)and tighten.
5. Insert lamp pole (D) into lamp pole (C)and tighten.
6. Insert lamp pole (E) into lamp pole (D) and tighten.
*If necessary, pull cord down through poles and out the
bottom of the base.
7. Install bulbs. Only use bulbs of specified type and maximum
rated wattage or less.
8. Plug the electrical supply cord into the wall outlet.
To turn On/Off use the turn switch located on the head of each
shade.
60W
3 x Type A Medium Base Bulbs (not included)
A
B
C
D
E
1
Instruction Manual
E-mail our customer service department .