Assembly Instructions

SEMI FLUSH MOUNT CEILING LIGHT
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
1.
3.
Attach screw and nut assembly [E] to bottom of light hub
base [D]. Remove decorative nut [F], standard nut [G] and
red washer [H] from screw and nut assembly [E].
Remove plastic overwrap from shade [I]. Place shade [I]
over end of screw and nut assembly [E]. Place diffuser [J]
over screw and nut assembly [E]. Place the red washer
[H], then the standard nut [G] on screw and nut assembly
[E].
Place the decorative bracket [K] over screw and nut
assembly [E], so that it covers the visible shade spokes.
Secure with decorative nut [F].
Install bulbs 60W max (bulbs not included).
Detach mounting plate [A] from canopy [B] by removing
canopy nuts[C].
Mounting plate [A] will attach to ceiling junction box.
2.
4.
5.
6.
7.
Note: Turn off switch before replacing a bulb. Make sure the bulb has sufficient time to cool down.
E
H
F
F G H
G
A
I
J
B
D
K
C
x2
F
K
J
D
I
E
A
B
C
Install light to ceiling. We recommend installa-tion by a
qualified electrical professional.