Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being Allen Wrench encase 0 easy and 5 being difficult). For some products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES When Jock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the larger phial washer and the head of the screw or bolt Some furniture comes with height adjustment knobs underneath each leg.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
Align legs (42,3) with stretchers (#4) and seat then secure legs to seat (#1) by using bolts (#A) with washers #A x PCs #D x apes #E x PCs Secure stretchers (#4) on legs by using screws Page 50of 7
Align long stretcher (#10) to table legs then secure by using bolts (#8) with barrel nuts #A x apes #B x PCs #D x dps #E x PCs #F x PCs Align table legs to the table then secure by using bolts (#A) with washers Align table legs to the table top and stretchers then secure table legs to table top by using bolts (#A) with #A x PCs #8 washers #D x PCs #E x apes Page 6 of 7
