Assembly Instructions

assembly instructions
BED FRAME ASSEMBLY
PAGE 2 OF 2
STEP 1
Assemble each leg with 2 Allen head screws (3/4”)
A
, 2 spring washers
D
and 2 flat washers
C
. Do not tighten screws.
STEP 2
Assemble short rail to side rail with 2 Allen head screws (3/4”)
A
, 2 spring washers
D
and 2 flat washers
C
for each end.
Do not tighten screws.
STEP 3
Turn the bed frame upright. Attach the middle rail to the short rail and insert 2 Allen head screws (3/4”)
A
, 2 spring
washers
D
and 2 flat washers
C
at each end. Do not tighten screws.
STEP 4
Assemble each support leg with
F
2 Allen head screws (1-1/4”)
B
, 2 flat washers
C
, and 2 hex nuts
E
at the allotted
spots. Tighten hex nuts and screws with provided Open wrench
I
and Allen wrench
J
.
STEP 5
Assemble plastic caps
G
and wood slates
H
. Insert plastic caps
G
into holes on rail and push in.
STEP 6
Tighten the screws from Step 1 to 4 using the proper Allen wrenchs.
NOTE: MAKE SURE THAT ALL SCREWS ARE TIGHTEN.
ADJUST THE ADJUSTABLE SUPPORT LEG (PART F) BEFORE USING THE BED.
E
B
C
F
C
D
A
STEP 1
STEP 5
G
H
STEP 4
STEP 3
STEP 2
C
C
D
D
A
A
Platform (Full Bed Frame)