Installation & Assembly

PARTS LIST

ASSEMBLY INSTRUCTIONS

Name Part

Qty.

Spare

Qty

Spare

Qty

Qty.

PartName

Cam Lock

REALS001

Cam Post

REALS003

14 1 14 1

Cam Sticker/Silver

NOTE:

①

. 1 Top and 2

Modesty Panels with Hardware

packed in one carton - MNCT96

②

. 2

Legs with Hardware

packed in one carton - MNCB

96" Conference Table

REALS102SLV

Items with HB are in hardware box.

PAGE 1
PARTS LIST Name Qty. Spare Part Name Qty 96" Conference Table HB A Qty. Spare Part Qty HB C 14 1 REALS001 14 1 REALS003 Cam Lock Cam Post HB B 14 1 REALS102SLV Cam Sticker/Silver NOTE: ①② . 1 Top and 2 Modesty Panels with Hardware packed in one carton - MNCT96 . 2 Legs with Hardware packed in one carton - MNCB ASSEMBLY INSTRUCTIONS Items with HB are in hardware box.
PAGE 2
IMPORTANT! PARTS LIST Name Part Qty. Name 1 K Part Review ALL instructions before beginning assembly. These instructions are provided to avoid problems that may occur from improper assembly or installation. The company and/or its distributor are not responsible for failure resulting from improper assembly or installation of this product. Moreover, all warranties are void for failure to follow these assembly instructions. Qty.
PAGE 3
2 Install Cam Posts (C) into threaded inserts in underside of Top (H). 3 Place Top (H) onto Leg (J) and Modesty Panel (K) and lock in place by turning Cams (A). Apply MNCB Cam Sticker onto Cams (A) of Legs (J). Apply Cam Stickers/Silver (B) onto Cams (A) of Modesty Panel (K). Insert Grommets into Top holes. A MNCB Grommets H MNCB Cam Sticker C K J K B J H C J MNCB Cam Sticker A NOTE: The arrow on the face of the Cam (A) should point towards the Cam Post (C) for proper alignment.