Installation & Assembly

INSTALLATION MANUAL

WARNING:

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A

PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS

INVOLVED.

* Check for electric, gas, & plumbing lines before drilling or consult a professional.

* Turn off your electricity at the circuit breaker or main fuse box before installation.

* Do not restore power to the line until fully installed.

* Do not exceed the recommended wattage.

* Always allow bulbs to cool for 10 minutes before changing.

1. Remove the mounting bracket (A) from

the canopy (C). Attach mounting bracket

(A) to junction box (not included) with

screws supplied.

2. Pass the wires through the tubes (D) and

canopy (C). Tighten the lamp body, tube

(D) and canopy (C).

3. Make electrical connections using wire

nuts (B).

4. Attach the canopy (C) to the mounting

bracket (A) and screw it by canopy

screws (E).

5. Install the light bulb (not included).

6. Install the glass shade (F) and secure it

by thumb screws. Repeat this process

with all 6 of the fixture arms.

Thanks for your purchase!

CHANDELIER

This fixture has been rated for up to six (6) Socket 40-Watt maximum candelabra light bulbs or

LED

equivalent bulbs (not included).

To avoid the risk of fire, DO NOT EXCEED THE RECOMMENDED LAMP WATTAGE.

The lighting fixture is meant for indoor use.

Pls read the installation instructions carefully and follow the steps:

PAGE 1
CHANDELIER INSTALLATION MANUAL WARNING: THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. * Check for electric, gas, & plumbing lines before drilling or consult a professional. * Turn off your electricity at the circuit breaker or main fuse box before installation. * Do not restore power to the line until fully installed. * Do not exceed the recommended wattage.