ASSEMBLY INSTRUCTION U-SHAPE SOFA SET
F N A M G (U) E J(4pcs) L I (V) B H T D Z J (W) K (X) R O Q O Z Notice: 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4. If the screws are not aligned with holes during asembly, please loosen all the other screws to 50% and continue the assembly process. 5.
Part list A J 4pcs B Chair side left frame (4 pcs) Chair back frame (4 pcs) Chair seat frame (4 pcs) D E F Chair front frame (4 pcs) Chair seat cushion (4 pcs) Chair back cushion(4 pcs) G H I Corner back left frame (1 pc) J 1pcs Corner seat frame (2 pcs) K L M N Corner long back cushion (2 pcs) Corner seat cushion (2 pcs) Corner right side frame (1 pc) Corner right front frame (1 pc) Corner armrest left frame (1 pc) O Corner short back cushion (2 pcs) Table side frame (2 pcs)
Part list Z Q Table front & rear frame (2 pcs) S R Table top frame (1 pc) T U Chair side right frame (4 pcs) Pillow (2 pcs) W V Corner armrest right frame (1 pc) Table glass (1 pc) Corner back right frame (1 pc) X Corner left front frame (1 pc) Corner left side frame (1 pc)
Hardware list 1 2 3 Bolt M6 x 25 mm (56 pcs) Bolt M6 x 25 mm (66 pcs) Bolt M6 x 35 mm (20 pcs) 4 5 Plastic feet (28 pcs) Allen key M4 (1 pc)
STEP 2 STEP 1 (Chair assembly) Connect Chair back frame (A) & Chair seat frame (B) with Bolt (3) Connect part from Step (1) & Chair side frame (J-4pcs) & (T) with Bolt (2) A J (4) 2 3 3 2 2 B T 2 STEP 3 STEP 4 Connect part from Step (1) & Chair front frame (D) with Bolt (2) Connect part from Step (3) & Plastic feet (4) with Bolt (1) 1 1 1 2 1 2 2 2 2 2 D
STEP 5 STEP 6 (Corner assembly) Put on Chair seat cushion (E) & Chair back cushion (F) to complete Chair F Connect corner back frame (G)-(U) & Corner seat frame (H) with Bolt (3) G (U) E 3 3 H STEP 7 STEP 8 Connect part from Step (6) & Corner armrest frame (I)-(V) with Bolt (3) Connect part from Step (7) & Corner side frame (K)-(X) with Bolt (2) & Bolt (3) I (V) 3 3 3 3 2 K (X) 2 2
STEP 9 STEP 10 Connect part from Step (8) & Corner front frame (J)-(W) with Bolt (2) Connect part from Step (9) & Plastic feet (4) with Bolt (1) 1 1 1 1 2 2 J (W) STEP 11 STEP 12 (Table assembly) Put on Corner seat cushion (L), Corner long back cushion (M) & Corner short back cushion (N) to complete Corner N M Connect Table top frame (Q) & Table front & rear frame (Z) with Bolt (2) Z 2 2 Q 2 2 L Z
STEP 13 STEP 14 Connect part from Step 12 & Table side frame (O) with Bolt (2) Connect part from Step 13 & Plastic feet (4) with Bolt (1) 1 O 1 1 2 2 2 1 2 O STEP 15 STEP 16 Put on Table glass (R) to complete Table Put on Pillow (S) to complete U-Shape set R S S
