Assembly Instructions

Screw Adjustable Glider Feet(⑦) into mounting positions on Leg Caps(⑥) by hand.
Step 3
Attach Leg(B) to Table Top(A) by placing a Washer(⑤) and Nut(④) onto the Iron Bar(①) and
tightening with Socket Wrench(③).
Repeat the same process with the other three Legs.
Tighten the Nuts fully in a sequential manner.
Step 4
Insert Leg Caps(⑥) into the base of the Legs(B) as pictured above.
Step 5
4 OF 6