Assembly Instruction

STEP 3
STEP-3:
1. Attach 2pc Wooden Cross Bar (8) to Pre-Assembled Right side panel (6,7) by inserting 2pc Long screw (C)
through the holes on the Right side panel then tighten to Wooden Cross bar (8).
2. Attach Top Shelf (1) to Right side panel by inserting 2pc Machine screw (B) through the holes on the Top
Shelf (1) then tighten to the Right side panel.
3. Repeat above point#2 to assemble other 2 shelves (2),(3).
STEP 4
STEP-4:
1. Drill 2 hole on the wall according to the hole’s distance on Top Shelf (1).
2. Insert 2pc Plastic Anchor (F) into the 2 holes on the wall.
3. Insert 2 Screw (E) through the holes on the Top Shelf (1) then tighten to 2 Plastic Anchor (F) with a Philip
Screwdriver.