Installation & Assembly

STEP9

(x6)

#A12120

(x18)

#A21110

IMPORTANT!

THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.

With the help of another person, carefully turn your unit over on its front side. Make sure the unit

is square. Position the back panel as shown. Using screws (5), attach back panel to back (E) but do

not tighten the screws. Align the back panel equally with outside edges and nail straight through

into back edges as shown. Now tighten the screws (5).

Assure that the unit is square.

Distance from corner to corner

must be equal as shown.

and/or serious injury.

Failure to do so could cause instability, product collapse,

All nails must be driven into the parts straight and centered.

Please make sure that the Back Panel is attached securely.

WARNING