Installation Instructions for Vanity Combo TO ENSURE THAT YOUR INSTALLATION GOES SMOOTHLY, WARNING: Base cabinet apposition o maximization weight of 200ibs. Overbidding PLEASE READY THESE INSTRUCTIONS THOROUGHLY PRIOR TO ‘maxis weight mit will compromise the integrity of the cabinet retractile STARTING. amd could cause the cabinet to fail. WARNING & CAUTION: Failure to follow wakings and cautions could CAUTION: Do not hang from the cabinet. seq ult in serious infirm.
NOTICE TO INSTALLER Internal Wall Blocking Installation * Horizontal row of wood 2.x 6 fractured wall blocks sre required and must be installed between wall studs a height to match where the top of th wall hung variety cabinets) will be installed. Carefully remove drywall in required locations to gain nooses to wall studs. Use cation to not disturb any electrical or plumbing utilities found within the wall. © To stall a second sow of 2 5.
WARNING rer Lot Lisle EU LL FREER Lee LT RETEST BI pL ERT BT LITER Cn Le Ee INSTALLATION 1. Drawer Removal Full extension deaves glide removal (If applicable) 1. Diem the drawer ss for 85 possible. 2. identify the plastic spring clips loaded in both sties, 3, At the same tins, press the tight slide spring slip demand and the left slide spring slip upward (Fig.| & Fig 2), 4. mee both spring clips ao held In the indistinct position, pull the dower straight out, Epoxy drawer glide removal (f applicable} 1.
INSTALLATION 3. Vanity Top Installation 1. Staleness the functor pes manufacturers installation instructions, 2. Hand tighten the pop-up dire with 2 Wrench. Be careful mnt to over-tightzn the pop-up drain, Over tightening may cause cracks on the mash fap, 3, Set the vanity top on bop of tae vacuity base, shocking the location of the trap and drain, 4. Remove vanity top geom vanity base, Apply fin bead of silicons compound suns the variety base and set the vanity top carefully in place.
