Assembly Instructions Caution : You must read this before you proceed Sofa Parts List Label Picture Description QTY (pc) A Backrest 1 B Wooden Leg 4 Page 1 of 6
C Base of Sofa 1 Description QTY (pc) Gasket 7 Hardwares List Label Picture Assembly Preparation Before Beginning Assembly: Page 2 of 6
Assembly Steps Sofa Backrest(A) Sofa Base(C) Legs(B) This product has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the product parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Leg pocket C Take out the Legs(B) and Gaskets(①) from the Leg pocket.
Install the Leg(B)at the bottom of the Sofa by placing one Gasket(①) on the threaded stem. Then insert threaded stem into the mounting postion at the corner of the Loveseat. Tighten by turning the Leg clockwise,Do not over tighten. Repeat the same process to install the remaining three Legs. Note: The use of Gaskets are OPTIONALand are especially useful to help alleviate slight wobbleness. Some Legs may need more than one gasket whilst some Legs may not need any.
Step 5 Test for stability Position Sofa right side up and test for stability. Your Sofa is ready for use. This Sofa can only be used on a flat, level surface.
Page 6 of 6
