ASSEMBLY INSTRUCTION Please do not use power drill, use Allen key provided. Do not use desk before assembling completely. Please put all of these screws into the holes and just screw 20%40% of every screw firstly, then fasten all of the screws. PS:Choose the larger Board 1 on the left or on the right according to your personal habits. If you want the desk like this , please follow Ste pl, Step 2-1, Step 3-1, Step 4-1, Step 5-1, Step 10-1 Step 11-1.
ASSEMBLY INSTRUCTION ® ® ® 1PC 1PC 1PC Te 1PC = 1PC ® 1PC 1PC 1PC 1PC 1 ® ® 1PC 1PC PCS PCS Hardware accessories No. PICTURE SIZE QTY No.
ASSEMBLY ~~ INSTRUCTION Spare No. PICTURE SIZE | QTY | | No.
ASSEMBLY INSTRUCTION STEP 7-1 = Notes : The guide rail — needs to be divided into two before proceeding to the next step.
ASSEMBLY INSTRUCTION STEP 9-1 Notes: This sliding part _ rd needs to be pushed out so that steps 11-1/ 11-2 are easier to install. STEP 10-1 Notes:The notch must be installed in the J TT same direction so that steps 11-1/ 11-2 are apd / < ~\ easier to install.
ASSEMBLY INSTRUCTION STEP 8-2 g=10 5 =10 I=1lf Notes : The part G needs divided into two before proceeding to the next step. == | Notes:This sliding part needs to be pushed out so that steps 11-1 / 11-2 are easier to install.
ASSEMBLY INSTRUCTION STEP 10-2 Notes: The notch of G2 must be installed in the same — direction so that steps / N\, 11-1 / 11-2 is easier to SPY install. Gy A 2 STEP 11-2 G2 must be aligned with Gl and pushed hard to complete the installation of the guide rail Notes:Check again this part is pushed out as the picture shows.
