ASSEMBLY INSTRUCTION Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and hardware. Compare with the parts list to be sure all parts are present. IMPORTANT : PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY.
ASSEMBLY INSTRUCTION HARDWARES LIST DRAWING QTY ITEM DESCRIPTION A MINIFIX CAM LOCK 44 PCS B MINIFIX CAM BOLT 44 PCS C WOOD DOWEL (M8 x 25MM) 26 PCS D WOOD DOWEL (M6 x 25MM) 60 PCS E JCBC SCREW M6 x 35MM 4 PCS F SPRING WASHER M6 x 13MM 4 PCS G FLAT WASHER M6 x 19MM 4 PCS I TRUSS M-SCREW (20MM) 10 PCS L 6/8" NAIL 14 PCS MORE HARDWARES DETAIL IN NEXT PAGE...
ASSEMBLY INSTRUCTION HARDWARES LIST DRAWING QTY ITEM DESCRIPTION M HANDLE 5 PCS N M4 ALLEN KEY (65MM) 1 PC O CSK C/B SCREW (M4 x 25MM) 10 PCS PARTS LIST DRAWING QTY ITEM DESCRIPTION C1 TOP PANEL 1 PC C2 LEFT PANEL 1 PC C3 RIGHT PANEL 1 PC C4 LEFT & RIGHT SUPPORT RAIL 2 PCS C5 CENTRE SUPPORT RAIL 3 PCS C7 BACK PANEL 1 PC MORE PARTS DETAIL IN NEXT PAGE...
ASSEMBLY INSTRUCTION PARTS LIST DRAWING QTY ITEM DESCRIPTION C8 DRAWER HEAD 5 PCS C9 DRAWER BACK PANEL 5 PCS C10 DRAWER BOTTOM PANEL 5 PCS C11 BOTTOM PANEL 1 PC 17 LEG (i) 2 PCS 18 LEG (ii) 2 PCS 19 DRAWER LEFT PANEL 5 PCS 20 DRAWER RIGHT PANEL 5 PCS 21 DRAWER BOTTOM SUPPORT RAIL 5 PCS PAGE 4 OF 20
ASSEMBLY INSTRUCTION PARTS ' LOCATION CHEST x 1 PC C1 C4 C7 C2 C5 C3 C11 17 18 17 18 DRAWER x 5 PCS C9 19 20 C10 21 C8 PAGE 5 OF 20
ASSEMBLY INSTRUCTION ASSEMBLY STEPS STEP 1 Insert 5 pieces (A) and 2 pieces (C) to the (C4) as shown.This step needs to be done twice. C C4 Arrow need to face upside. Arrow need to face outside. Arrow need to face outside. A C4 Assembled become like this STEP 2 Insert 2 pieces (A) and 2 pieces (C) to the (C5) as shown.This step needs to be done three times. Arrow need to face outside. Arrow need to face outside.
ASSEMBLY INSTRUCTION STEP 3 Insert 4 pieces (A) , 5 pieces (B) and 3 pieces (C) to the (C2) as shown. B C2 C Assembled become like this Arrow need to face upside. Arrow need to face down. A C2 STEP 4 Insert 4 pieces (A) , 5 pieces (B) and 3 pieces (C) to the (C3) as shown. B C3 C Assembled become like this Arrow need to face upside. Arrow need to face down.
ASSEMBLY INSTRUCTION STEP 5 Insert 10 pieces (B) to the (C1) as shown. B C1 Assembled become like this STEP 6 Insert 4 pieces (B) and 6 pieces (C) to the (C11) as shown.
ASSEMBLY INSTRUCTION STEP 7 Combine the (C4) and (C5) to the (C2) then tighten the 5 pieces (A)-(pre insert in step 1 and 2) as shown. C4 C5 C5 C4 C2 STEP 8 Combine the (C3) to the (C4) and (C5) then tighten the another 5 pieces (A)-(pre insert in step 1 and 2) as shown.
CH ASSEMBLY INSTRUCTION STEP 9 Combine the (C11) to the (C2) and (C3) (A)-(pre insert in step 3 and 4) as shown. C3 C3 C11 C2 C2 STEP 10 Insert 4 pieces (C),(E),(F) and (G) to combine the (17) and (18) to the (C11) as shown.
ASSEMBLY INSTRUCTION STEP 11 Combine the (C1) to the frame then tighten the remaining 10 pieces (A)-(pre-insert in step 1,3 and 4) as shown. C1 C4 C4 C2 C3 INSIDE VIEW C2 C3 STEP 12 Insert 2 pieces (B) to the (C8) as shown.This step needs to be done five times.
ASSEMBLY INSTRUCTION STEP 13 Insert 1 piece (A) , 1 piece (B) and 2 pieces (D) to (19) as shown.This step needs to be done five times. B Arrow need to face front. 19 A Assembled become like this D STEP 14 Insert 1 piece (A) , 1 piece (B) and 2 pieces (D) to (20) as shown.This step needs to be done five times. B Arrow need to face front.
ASSEMBLY INSTRUCTION STEP 15 Insert 2 pieces (A) and 4 pieces (D) to (C9) as shown.This step needs to be done five times. Arrow need to face outside. Arrow need to face outside. A D C9 Assembled become like this STEP 16 Insert 4 pieces (D) to (21) as shown.This step needs to be done five times.
ASSEMBLY INSTRUCTION STEP 17 Combine the (19) and (20) to the (C9) . Then tighten the 2 pieces (A)-(pre-insert in step 15) as shown.This step needs to be done five times. C9 20 19 C9 STEP 18 Put the (C10) into the gap of (19),(20) and (C9) as shown.This step needs to be done five times.
ASSEMBLY INSTRUCTION STEP 19 Check the position then combine the (21) to the (C9) as shown.This step needs to be done five times. Attention : Please check the direction of item (21) before start doing this step. Face to down Face to (C8) Face to (C9) Face to (C10) 90 ° C10 19 20 21 STEP 20 Combine the (C8) to the drawer frame. Then tighten the 2 pieces (A)-(pre-insert in step 13 and 14) as shown.This step needs to be done five times.
ASSEMBLY INSTRUCTION STEP 21 Insert 1 piece (O) to the (C9) and (21) as shown.This step needs to be done five times. C8 O 21 C9 O STEP 22 Insert 2 pieces (I) fix the (M) as shown.This step needs to be done five times.
ASSEMBLY INSTRUCTION STEP 23 Insert the 14 pieces (L) to fix the (C7) as shown. C1 L C2 C7 STEP 24 Align the position then push the 5 pieces drawer to inside exactly by your hand as shown.
ASSEMBLY INSTRUCTION STEP 25 ASSEMBLY COMPLETED PAGE 18 OF 20
PAGE 19 OF 20
This sticker was sticked at one of the DRAWER LEFT PANEL(19). Place the drawer which sticked a warning label in the top as shown.
