ASSEMBLY INSTRUCTION Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and hardware. Compare with the parts list to be sure all parts are present. IMPORTANT : PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY.
ASSEMBLY INSTRUCTION HARDWARES LIST DRAWING QTY ITEM DESCRIPTION A MINIFIX CAM LOCK 44 PCS B MINIFIX CAM BOLT 44 PCS C WOOD DOWEL (M8 x 25MM) 28 PCS D WOOD DOWEL (M6 x 25MM) 60 PCS E JCBC SCREW M6 x 35MM 4 PCS F SPRING WASHER M6 x 13MM 4 PCS G FLAT WASHER M6 x 19MM 4 PCS H CSK C/B SCREW (M3.5 x 12MM) 30 PCS I TRUSS M-SCREW (20MM) 10 PCS MORE HARDWARES DETAIL IN NEXT PAGE...
ASSEMBLY INSTRUCTION HARDWARES LIST DRAWING QTY ITEM DESCRIPTION J LEFT DRAWER SLIDE 5 PCS K RIGHT DRAWER SLIDE 5 PCS L 6/8" NAIL 14 PCS M HANDLE 5 PCS N M4 ALLEN KEY (65MM) 1 PC PAGE 3 OF 22
ASSEMBLY INSTRUCTION PARTS LIST QTY ITEM DESCRIPTION C1 TOP PANEL 1 PC C2 LEFT PANEL 1 PC C3 RIGHT PANEL 1 PC C4 LEFT & RIGHT SUPPORT RAIL 2 PCS C5 CENTRE SUPPORT RAIL 3 PCS C6 BOTTOM PANEL 2 PCS C7 BACK PANEL 1 PC C8 DRAWER HEAD 5 PCS C9 DRAWER BACK PANEL 5 PCS DRAWING MORE PARTS DETAIL IN NEXT PAGE...
ASSEMBLY INSTRUCTION PARTS LIST DRAWING QTY ITEM DESCRIPTION C10 DRAWER BOTTOM PANEL 5 PCS 17 LEG (i) 2 PCS 18 LEG (ii) 2 PCS 19 DRAWER LEFT PANEL 5 PCS 20 DRAWER RIGHT PANEL 5 PCS 21 DRAWER BOTTOM SUPPORT RAIL 5 PCS PAGE 5 OF 22
ASSEMBLY INSTRUCTION PARTS ' LOCATION CHEST x 1 PC C1 C4 C7 C2 C5 C3 C6 17 18 17 18 DRAWER x 5 PCS C9 19 20 C10 21 C8 PAGE 6 OF 22
ASSEMBLY INSTRUCTION DESCRIPTION ATTENTION : With shape this side must be face to backside.
ASSEMBLY INSTRUCTION ASSEMBLY STEPS STEP 1 Insert 2 pieces WOOD DOWEL (C) to 1 piece LEFT AND RIGHT SUPPORT RAIL (C4) . Then insert 5 pieces MINIFIX CAM LOCK (A) by your hand as shown.This step needs to be done twice. C C4 Arrow need to face upside. Arrow need to face outside. Arrow need to face outside. A Assembled become like this C4 STEP 2 Insert 4 pieces WOOD DOWEL (C) and 2 pieces MINIFIX CAM LOCK (A) to 1 piece BOTTOM PANEL (C6) as shown.This step needs to be done twice.
ASSEMBLY INSTRUCTION STEP 4 Align the positon of hole then put the 5 pieces LEFT DRAWER SLIDE (J) on the LEFT PANEL (C2). Then insert 15 pieces CSK C/B SCREW (H) as shown. J C2 H C2 STEP 5 Insert 7 pieces MINIFIX CAM BOLT (B) and 3 pieces WOOD DOWEL (C) to the LEFT PANEL (C2) .Then insert 2 pieces MINIFIX CAM LOCK (A) by your hand as shown. B C2 C Assembled become like this Arrow need to face upside.
ASSEMBLY INSTRUCTION STEP 6 Align the positon of hole then put the 5 pieces RIGHT DRAWER SLIDE (K) on the RIGHT PANEL (C3). Then insert 15 pieces CSK C/B SCREW (H) as shown. K C3 H C3 STEP 7 Insert 7 pieces MINIFIX CAM BOLT (B) and 3 pieces WOOD DOWEL (C) to the RIGHT PANEL (C3) .Then insert 2 pieces MINIFIX CAM LOCK (A) by your hand as shown. B C3 C Arrow need to face upside.
ASSEMBLY INSTRUCTION STEP 8 Insert 10 pieces MINIFIX CAM BOLT (B) to the TOP PANEL (C1) as shown. B C1 Assembled become like this STEP 9 Align the position of hole then combine the LEFT AND RITGH SUPPORT RAILS (C4) to the LEFT PANEL (C2) by your hand. Then, tighten the 2 pieces MINIFIX CAM LOCK (A) at (C4) marked by the arrows (pre-insert in step 1) as shown.
ASSEMBLY INSTRUCTION STEP 10 Align the position of hole then combine the 3 pieces CENTRE SUPPORT RAIL (C5) to the LEFT PANEL (C2) by your hand. Then, tighten the 3 pieces MINIFIX CAM LOCK (A) at (C5) marked by the arrows (pre-insert in step 3) as shown. C5 C5 C4 C4 C2 C2 STEP 11 Align the position of hole then combine the BOTTOM PANELS (C6) to the LEFT PANEL (C2) by your hand. Then , tighten the 2 pieces MINIFIX CAM LOCK (A) at (C6) marked by the arrows (pre-insert in step 2) as shown.
ASSEMBLY INSTRUCTION STEP 12 Align the position of hole then combine the RIGHT PANEL (C3) to the LEFT AND RIGHT SUPPORT RAILS (C4) , CENTRE SUPPORT RAILS (C5) and the BOTTOM PANELS (C6) by your hand . After that , tighten the 7 pieces MINIFIX CAM LOCK (A) at (C4),(C5) and (C6) marked by the arrows (pre-insert in step 1 to 3) as shown. C3 INSIDE VIEW C4 C5 C4 C5 C6 C6 C2 C2 STEP 13 Insert 4 pieces WOOD DOWEL (C) to the BOTTOM PANELS (C6).
ASSEMBLY INSTRUCTION STEP 14 Align the position of hole then combine the TOP PANEL (C1) to the frame.Then , tighten the remaining 10 pieces MINIFIX CAM LOCK (A) at (C2),(C3) and (C4) marked by the arrows (pre-insert in step 1,5 and 7) as shown. C1 INSIDE VIEW C4 C4 C5 C3 C2 C2 C3 C6 STEP 15 Insert 2 pieces MINIFIX CAM BOLT (B) to 1 piece DRAWER HEAD (C8) as shown.This step needs to be done five times.
ASSEMBLY INSTRUCTION STEP 16 Insert 1 piece MINIFIX CAM LOCK (A) , 1 piece MINIFIX CAM BOLT (B) and 2 pieces WOOD DOWEL (D) to 1 piece DRAWER LEFT PANEL (19) as shown.This step needs to be done five times. B Arrow need to face front. Assembled become like this 19 A D STEP 17 Insert 1 piece MINIFIX CAM LOCK (A) , 1 piece MINIFIX CAM BOLT (B) and 2 pieces WOOD DOWEL (D) to 1 piece DRAWER RIGHT PANEL (20) as shown.This step needs to be done five times. B Arrow need to face front.
ASSEMBLY INSTRUCTION STEP 18 Insert 2 pieces MINIFIX CAM LOCK (A) and 4 pieces WOOD DOWEL (D) to 1 piece DRAWER BACK PANEL (C9) as shown.This step needs to be done five times. Arrow need to face outside. Arrow need to face outside. A D C9 Assembled become like this STEP 19 Insert 4 pieces WOOD DOWEL (D) to 1 piece DRAWER BOTTOM SUPPROT RAIL (21) as shown. This step needs to be done five times.
ASSEMBLY INSTRUCTION STEP 20 Align the position of hole then combine 1 piece DRAWER LEFT and DRAWER RIGHT PANEL (19)&(20) to 1 piece DRAWER BACK PANEL (C9) by your hand. Then , tighten the 2 pieces MINIFIX CAM LOCK (A) at (C9) (pre-insert in step 18) as shown. This step needs to be done five times. C9 20 19 C9 STEP 21 Put 1 piece DRAWER BOTTOM PANEL (C10) into the gap by your hand as shown.This step needs to be done five times.
ASSEMBLY INSTRUCTION STEP 22 Align the position of hole then insert 1 piece DRAWER BOTTOM SUPPORT RAIL (21) to drawer frame as shown. This step needs to be done five times. 90 ° C10 19 20 21 STEP 23 Align the position of hole then combine 1 piece DRAWER HEAD (C8) to drawer frame by your hand.Then tighten the 2 pieces MINIFIX CAM LOCK at (19)&(20) marked by the arrows (pre-insert in step 16 and step 17) as shown. This step needs to be done five times.
ASSEMBLY INSTRUCTION STEP 24 Fix 1 piece HANDLE (M) with 2 pieces TRUSS M-SCREW (I) as shown. This step needs to be done five times. M I 20 19 C8 STEP 25 Align the position of hole then insert the 14 pieces 6/8" NAIL (L) at the BACK PANEL (C7) with using a hammer as shown.
ASSEMBLY INSTRUCTION STEP 26 Align the position of drawers and push inside exactly by your hand as shown.
PAGE 21 OF 22
This sticker was sticked at one of the DRAWER LEFT PANEL(19). Place the drawer which sticked a warning label in the top as shown.
