Assembly Instruction

LOVESEAT / CHAIR
︱
Page 2 of 2
STEP 1:
Please put Loveseat Body (1) on a carpeted or padded surface.
Open the zipper from the bottom of the Loveseat Body (1) and take out the 4 pieces of Legs (2).
Attach 1 piece of Leg (2) to the bottom of Loveseat Body (1) and secure by hand as shown.
Please note that the legs needs to be in the right direction.
Repeat the same steps for other 3 pieces of Legs (2).
STEP 2:
Close the zipper on the bottom of the Loveseat Body (1).
Carefully turn over the assembled Loveseat Body (1) and Legs (2) from step 1 as shown.
Assembly is complete. Your loveseat is ready to be used now!
1
2
2
2
2
2
2
2
2
1
Legs &
Hardware inside