Assembly Instructions

Step 2
Step 3
Stand the Table up.
Your Table is ready for use.
If the Table wobbles adjust the Pre-installed Levellers at the bottom of the
Legs until the Table is level.
This Table can only be used on a flat, level surface.
Carefully place the Table Top (A) facedown on a clean, non-marring surface
with assistant from second adult. Align the mounting positions on assembled
Leg Frame(C) and Support Rail (B) with the mounting positions on Table Top
(A), then attach them together by using Washers(③) and Long Bolts (②) with
Allen Key (④).
Tightening all Bolts(①&② )completely in a sequential manner.
Page 4 OF 5