Tufted Bench With Storage ASSEMBLY INSTRUCTIONS
Guidelines Our primary objective is to provide fast, friendly customer service to all of our customers. We are here to help if you have any questions, comments, or are in need of warranty replacement parts. FAILURE TO FOLLOW THESE WARNINGS WHEN IN USE COULD RESULT IN INJURY • Do not stand on the item or use as a step ladder. • Do not use this item unless all bolts and screws are firmly secured and fastened. • Check all bolts and screws every 90 days. As necessary tighten if any are loose.
Pre-Assembly Preparation: Please read through this instruction booklet before beginning assembly of this item. Two adults are recommended for assembly. • Clear out the space for assembly and lay out all parts on Parts List, extra room will allow you to easily determine if all the pieces are present. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. • Keep small parts and pieces away from children and pets until fully assembled.
Parts List A Wood Legs (4) B Bench Body (1) 4
Step 1-- 5 Remove all parts from the carton and place them on a protected surface or carpet. Take the 4 pcs of Wood Legs (A) out from the storage of Bench Body (B).
Place the Bench Body (B) upside down, and insert Wood Legs (A) into the bottom of Step 2-- the Bench Body (B) as shown and screw it tightly.
Step 3-- 7 Place bench upright on level floor, then the assembly is completed.
Limited Warranty The exceptions or exclusions to this warranty are: • Upholstery material and foam cushion material is warranted against defects in material and workmanship for Holdings seating products are warranted against defects a period of one year, beginning on the date of purchase as shown on the original sales receipt. in material and workmanship while owned by the “Original Purchaser”.
