Owner Manual

Side Table

Assembly Instructions

1. Attach 2 x Runner (H)/CL to Left Side Panel (2) with 6 x Small Screws (C) and

tighten with a screwdriver (not supplied).

Note:

A. Please follow the CL mark on Runner (H)/CL to attach to Left Side Panel (2) as

below image.

B. Align Runner (H)/CL with the edge of the board. Fix Screw (C) into the second

assembly hole of Runner (H)/CL onto Left Side Panel (2) as below image.

2. Attach Runner (H)/CR to Right Side Panel (3) with 6 x Small Screws (C) and

tighten with a screwdriver.

Note:

A. Please follow the CR mark on Runner (H)/CR to attach to Right Side Panel (3) as

below image.

B. Align Runner (H)/CR with the edge of the board. Fix Screw (C) into the second

assembly hole of Runner (H)/CR onto Right Side Panel (3) as below image.

x 12

x 2