Use & Care Guide

5. Install the bulb and assemble the shade

□ Prior to installing the bulb, inspect socket for silica packet. If packet is

present, then remove and throw away. Do not expose it to children or pets.

□ Install the 120V, 60Hz, 100-watt max. medium-base type A bulb (not included)

into the socket of the light lamp.

□ Place the shade (B) over the upper metal frame (C), and then secure the harp to

the hook by pulling the harp.

□ Tighten the screw with screwdriver (K) after the shade (B) is in place

(Screwdriver is included), and then screw the finial (A) to top of the upper metal

frame (C).

□ Plug cord into an outlet and turn on at the switch.

Assembly instructions (continued)

Screw