TV STAND ‘Assembly instructions We have designed our furniture with you the customer in ind: Our clear space easy 10 follow: step by step instructions will guide you through the project from start fo finish. Fal confident that this will be a fun and rewarding project Thi final product will be a quality pace of furniture that will go together smoothly and give you years of enjoyment.
PAGE 20f7 PARTS IDENTIFICATION Please count and verify all parts before assembly (1) Top Panel 1pe (2) Left Upper Divider Panel 1pc (3) Shelf ipc (4) Lower Divider Panel ipc (5) Bottom Panel 1pc (6) Left Side Panel ipe (7) Right Side Panel 1pt (8) Front Support apes (9) Right Upper Divider Panel (10) Medium Support PCs {11) Upper Back Panel Toc (12) Lower Back Panel 1pc (13) Left Door pe (14) Right Door 1pc pe
Step PAGE: Attach door magnets (G} to unit with Note: * Place item on a smooth/soft small screws (H) ag shown. surface. such as a towel or carpet to 2. Attach hinges (KJ to unit with misdid avoid scratch. sowers (L) 3 Attach handles to drawer fronts as shown. Gently tighten screws. Ste p2 1 Attach dowels (C) and cam bolts (A) into top panel (11 2. Assemble Pisces as shown 3. Gently tighten cassocks (8) and screws (I) 4. Place stickers over holes.
Step PAGE: 50f7 1. Attach dowels (CG) into divider panel (4), attach cam bolts (A) into shelf and bottom panel 2 Assemble pieces as shown. Gently tighten cam locks (8) and screws (BD) 1. Attach cam bolts (A) into supports (8.10) 2. Connect supports (8) to medium supports (10) as shown. Gently tighten cam locks.
Step PAGE: Bol 7 1 Attach dowels (C) and cam bolts (A) into bottom panel (5). 2. Attach supports (8.10) assembly to main unit and gently tighten cam locks. 1. Attach dowels {C) and cam bolts (A) into left and right side panel (67). 2. Attach side panels lo assembly. Gently tighten cam locks.
Step PAGE: Tof 7 1. Attach back panels (11,12) to TV stand using nail {0 2. Carefully tap foot pins (P) into base of Unit. Step 1. Attach hinges (K) to unit with medium screws (L). 2. Attach stretch pins (E) to unit using screws (F).
