Installation & Assembly

SAFETY TIPS
1. Unpack your fan and check the contents. Do not discard the carton. If
warranty replacement or repair is ever necessary the fan should be returned in
original packaging. Remove all parts and hardware. Do not lay motor housing
on its side: the decorative casting may shift.
2. Examine all parts. You should have the following:
1. Mounting Bracket/Mounting Plate
2. Downrod/Ball assembly
3. Ceiling canopy
4. Fan Housing Motor, and switch housing. Remove rubber shipping spacers from
motor. Keep them in case you need to return fan.
5. Set of Blades
6. Blade Arms
7. Light Kit (or different light)
8. Parts Pack Containing:
A/ Mounting bracket hardwares (wire nuts)
B/ Blade attachment hardwares (screws with washers for each blade).
C/ Blade arm attachment hardware (motor screws and lock washers may already
be in fan motor)
D/ Pull chain/Ball
UNPACKING YOUR FAN
Page 3