Caution : You must read this before you proceed Chair Picture Label A Picture Description QTY Back Panel 1
B Chair Frame 1 Description QTY ① Bolt (6*20mm) 5 ② Washer 5 ③ Allen Key 1 Label Before Beginning Assembly: Picture
Overview Back Panel(A) Chair Frame(B) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the abovepicture is to help you put the various parts into perspective. Please readthrough the instructions below to familiarise yourself with the parts andsteps before assembly.
Step 1 Unpack and place all parts on a clean, non-marring surface. Align the mounting positions on Chair Frame(B) with Back Panel(A). Attach Back Panel(A) to Seat Frame(B) using Bolts(①) and Washers(②) with Allen Key(③) as pictured above. After all Bolts are in place, tighten Bolts fully in a sequential manner. Step 2 Your Chair is ready for use. This Chair can only be used on a flat, level surface.
