Assembly Instructions

Panel

Shoulder

Attach the Cam-bolt to the specific pre-drilled holes on the panel. Use a Phillips Screwdriver to

tighten Cam-bolt vertically until shoulder is flushed (on the same level) with panel. Do not

over-tighten or under-tighten.

Cam-bolt head needs to be in centre

Wrong

Correct

Correct Wrong

Shoulder is

above panel

Use a Flat Screwdriver to turn the Cam-lock

clockwise one half a turn so it locks onto the

head of the Cam-lock. Turn only until it is

snug. Over-tightening could damage

Cam-lock or/and Cam-bolt.

5/14

Instructions For Fastening

CAM-BOLT AND CAM-LOCK

Align the arrow of the Cam-lock to the

Cam-bolt head and insert the Cam-lock.

Panel