Item Brochure
High Precision Altimeter
KEYS TO ITS POWER
TRUE ONE-PERSON OPERATION
DISPLAYS ELEVATIONS DIRECTLY TO:
0.1”, 1/8”, 0.01’, or 2mm;
0.01”, 0.001’, or 0.2mm IN HIGH PRECISION (HP) RANGE
“SEES” AROUND OR OVER VISUAL OBSTRUCTIONS
SETUP VERTICAL RANGE IS EQUIVALENT OF A 40’ (12m) ROD & 20’ (6m) TRIPOD
MEASURES OVER ANY ELEVATION OR DISTANCE ON EARTH WITHOUT CALCULATIONS
BUILT JOB-SITE RUGGED & NEVER NEEDS FACTORY CALIBRATION
HAS NUMEROUS POWERFUL BUILT-IN FUNCTIONS & PC INTERFACE
POWERFUL BUILT-IN FUNCTIONS
AUTO-OFF – Shuts unit off after 4 min. without movement or key presses to preserve battery.
HOLD – Freezes the display if not in view – also used with other functions.
ZERO – Sets display to read zero at a reference – the same as setting the target on a rod.
SCALE – For readings in fractional or decimal inches, feet or meters.
RES – For faster, less precise rough readings.
MARK – Lets you sound leveling or limit tones to supplement the display.
RECORD – Gives Average, Minimum or Maximum of any number of readings.
CAL – Calibrates accuracy of vertical readings – like calibrating a rod.
TEMP – Displays ambient temperature – useful in concrete work or with adhesives.
HIGH PRECISION – Allows paper-thin measurements to 0.005” (0.1mm) in HP range.
CARRY – Allows unlimited ranges without tabulation or calculation.
ELEVATION – For setting readings in sea level elevation at a known survey monument.
RECORD DATA – Stores up to 137 readings for later recall.
INSPECT/DUMP – View stored data or dump to PC for tables, profiles, 3D or Topo maps.
MONITOR – Logs data on a PC to monitor levels of tanks, lakes or streams.
KEY FEATURES & SPECIFICATIONS
SETUP/PACK-UP TIME: Typically less than 30 seconds to unpack, zero and read.
RANGES: 40’ vertical (4’ in HP) by 200’ horizontal circle (150’ for PRO-2000B);
Unlimited ranges in CARRY function.
INTERNAL PRECISION: 0.05”; 0.005” in HP.
TYPICAL ISOTHERMAL ACCURACY: Greater of 0.1” (0.01” HP) or 0.15% of measured elevation.
TEMP. RANGE: -22°F to +158°F (-30°C to +70°C) operating; -40°F to +158°F (-40°C to +70°C) storage.
DROP RESISTANCE: Measurement Module 5’ (1.5m) onto concrete; Base Unit 3’ (1m) onto concrete.
WATER RESISTANCE: Can be lightly rinsed with a hose but cannot be immersed.
9V BATTERY LIFE: 1 year of typical daily use.
MEMORY LIFE: Saves latest data and settings indefinitely even without a battery.
PC SERIAL PORT: IR output for optional PC Serial Interface cable.
UNIPOD LENGTH: 15” (38.1cm) to a calibrated 48” (121.9cm).
WEIGHT: Measurement Module 1 lb (0.45kg); Total weight 12 lbs. (5.50 kg), 8 lbs. (3.65kg) PRO-2000B.
SIZE: Measurement Module with boot 3.75”H x 4.75”W x 1.75”D (9.5cm H x 12.1cm W x 4.5cm D)
Base Unit 16.0”H x 10.5”W x 7.5”D (40.6cm H x 26.7cm W x 19.1 cm D).
WARRANTY: One year parts & labor for mfg defects; 2 year prorated for hydro-pneumatic parts & labor.