User manual

ASSEMBLY
Z.I.P.P.E.R Maschinen GmbH  www.Zipper-maschinen.at
ZI-BRM35 / ZI-BRM56 / ZI-BRM60 29
Package Contents:
ZI-BRM35:
1x lawnmower with demounted guide rail, 1x grass catcher with 1x holder, instruction sheet, 1x
socket wrench for spark plug with pin 8x120mm, 2x plastic eyelets
ZI-BRM56:
as above, plus: grass catcher consisting of 3 parts and screws, 1x handle for grass catcher bod-
ice, 4 mounting screws f. Handle, 1x side off draft guidance, 1x mulching, 1x storage console
ZI-BRM60:
as above, plus: 1x handle for grass catcher, 4 mounting screws for handle,
1x side discharge guide, 1x mulching.
Note: When setting up and folding the handlebar is particularly important to pay atten-
tion to kink-free course of the Bowden cables.
13.2 Mounting the guide bar
Remove the protective film from the guide rail. Deflected tighten with 2 Star knobs on both sides
On the chassis on both sides remove the 2 nuts preassembled with 2 screws. (fig. 1)
Guide rail and fix the lower part with two screws on both sides (fig. 2) on the chassis of the
mower
13.3 Draw-in starter handle rope guide
Loosen the motor brake by pressing the engine brake handle (2) to the spar. Attach the pull-
starter grip to the top of the spar-provided cable guide (fig. 4/5).
Fig. 1
Fig. 2
Fig. 3
Fig. 4