User manual

ASSEMBLY
Z.I.P.P.E.R Maschinen GmbH  www.Zipper-maschinen.at
ZI-BRM35 / ZI-BRM56 / ZI-BRM60 31
When the halves with 3 screws below the outside as shown in fig. 10 Bolt together.
Handle the grass catcher cover with 4 screws on the inside (Fig. 7) of the grass catcher with star
screwdriver screw (Fig. 8)
Put lid on grass catcher pan and all around good push in terminal block (Fig. 9).
Cover with grass catcher tray screw holes at the
sides. (Fig. 13)
13.5.1 Remove the mulch wedge:
Note: Carry out only with the engine stopped and complete stop the cutter!
Lift the rear discharge door (Fig. 14) and remove the mulching by releasing him at the notch
and remove. (Fig. 15)
Fig. 14
Fig. 15
Fig 11
Fig 12
Fig 13