User manual

OPERATION
Z.I.P.P.E.R Maschinen GmbH  www.Zipper-maschinen.at
ZI-BRM35 / ZI-BRM56 / ZI-BRM60 35
14.3 Self-driving function / auto-wheel drive
Press the wheel drive control lever (8) to the guide rail (fig.
40) and the mower will move automatically with the en-
gine running at about 3.0 km / h forward.
Let the wheel drive control lever to release the mower no
longer automatically moves forward.
14.4 Grass catcher
With Drain and clean the grass catcher, make sure that the mesh is vented.
Empty the grass catcher before filling to maximum (50-70% share) and it will improve the collec-
tion of lawn and grass.
14.5 ZI-RBM 56 / ZI-BRM 60
Function 3 IN 1 FUNCTION (mulch removal, side and rear ejection)
This mower can be converted for its various functions, depending on the application:
From lawn mower with rear discharge to:
1 a mulching mower or
2 a lawn mower with side discharge
Mowing the grass catcher - rear ejection (Fig 16/17)
14.5.1 Conversion to a mulching mower
Note: Carry out only with engine stopped and a complete stop of the cutter!
Lift the chute deflector and remove the grass catcher.
Slide the mulching plug into the opening provided. Push it into the opening. (Fig. 14/15)
Close the eject cover.
14.5.2 Change to the mower with side discharge
Note: Carry out only with engine stopped and a complete stop of the cutter!
Lift the chute deflector and remove the grass collection container.
Mount the mulching plug into the rear discharge opening (s conversion to mulching mower)
Lift the side cover for side discharge (fig. 25). Install the side ejection guide to the holder of the
flap. (fig. 26)
Fig. 24
Fig. 25
Fig. 26