User manual

MOUNTING
Z.I.P.P.E.R Maschinen Austria www.Zipper-maschinen.at Seite22
Elektro-Laubsauger / Electric Blower ZI-BM870ECO / ZI-SBH3000
13.2 Assembly
13.2.1 Suction mount
Use base suction pipe (5) to the suction fan (1) and screw on with 2 screws (ZI-SBH 3000
M5x25 machine screws with hex nuts) up and down with Phillips screwdriver
ZI-SBH 2600: front suction pipe (6) to use suction base (5) and screw on with 2 screws
above and below
ZI-SBH 3000: Front intake manifold (6) to use suction base (5) and top with 2 sheet metal
screws with washers and tighten down with machine screws M5x25 and hex nut.
Wheels unscrew and screw
together as shown on front
of intake manifold bore.
ZI-SBH 3000
-when needed-
Put on the floor cleaner
with wheels